






























Your Custom Text Here
"I am a proud owner of your Easy Launch system mounted on my 10' boat. The system works even better than anticipated."
John in Kent, WA.
"Upon inspection of the wheels... they are indeed well made and well thought out in their design. I'm sure I'll get years of service from them. Thanks for making a quality product."
Geoff in San Diego, CA.
"I recently learned about your 'Easy Launch' system from a neighbor. I had struggled for months to launch my 15 foot aluminum boat. It always took two or three muscle-men to lift the boat in and out of the water, especially during low tide. I installed your 'Easy Launch' wheels last week and was furious... that I hadn't discovered them sooner!"
Richard in Kirkland, WA.
"We took the boat out last night, just the two of us, all by ourselves. I was able to winch it up while Harvey guided it over the logs. We didn't grunt or groan once! Such a pleasure. We hope you know how much we appreciate your efforts."
Kay in Coupeville, WA.
"I'm going to have my boat back in action much, much sooner than I anticipated. You provide a great product and great service."
Terry in Lynnwood, WA.
"The wheel arrived yesterday and I installed it this morning with little difficulty. From a very well satisfied "Easy Launch" customer, thanks."
Forrest in La Mesa, CA.
"There is up to a 10 foot tide variation on Puget Island, so your wheels are great for our sloped sandy beach. They have been a life-saver for us."
John in Beaverton, OR.
"The front wheel works great!"
Phil in Kaneohe, HI
"I recently visited a relative... who owns a small aluminum boat, and on the rear of the boat he has mounted two wheels -- in order to ease his transport over the rocky tidal beach and into the water. I was quite excited about the product, so I wrote down the name of the manufacturer. Please send me further information."
Nils in Denmark
"I've had several people ask for your address after seeing your wheels on my boat. Hope that turns into sales for you."
Ben in Cambria, CA.
"Thanks so much for sending the transom wheels. We are thrilled."
Bob in Rancho Cordova, CA.
"I simply wanted to tell you what a neat contraption that Easy Launch is. I have used it on my little 10 'footer', and 'by George' it has been a joy, even from shifting the boat around in the garage."
Bill in Seattle, WA
"I'm happy to say I was able to put Easy Launch to the test, and with most gratifying results. I've had trouble with my legs and hips and have not been able to go fishing for the last four years. Yesterday, thanks to 'Easy Launch', I was able to go and enjoyed a wonderful day."
Nes in Edmonds, WA.
"I recently learned about your 'Easy Launch' system from a neighbor. I had struggled for months to launch my 15 foot aluminum boat. It always took two or three muscle-men to lift the boat in and out of the water, especially during low tide. I installed your 'Easy Launch' wheels last week and was furious... that I hadn't discovered them sooner!"
Richard in Kirkland, WA .
1. Designed and manufactured with unsurpassed quality (two-year warranty).
2. Has solid cast aluminum construction. No welds or bolts.
3. Anodized for salt water use (highly corrosive resistant).
4. Has stainless steel locking pins and mounting hardware (will not rust).
5. Locking pins are connected by a stainless steel lanyard to help prevent loss.
6. The wheels are designed for strength, durability and performance.
7. Airtight polyethylene wheels are 6" wide and 12" high x 1/4" thick.
8. Wheels roll smoothly on hard surfaces with patented tread design.
9. The 'posi-roll tread' wheels roll over sand and mud, always climbing over the terrain rather than plowing or skidding.
10. The wheels can be used as a troll brake.
11. Wheels do not interfere with motor or fishing.
12. The boat, with wheels secured in standby position, can be rolled and/or stored upside down, clear of the ground.
13. The wheels can assist in loading the boat, for car top transportation.
14. Lightweight and strong (rear set 14 pounds; bow assembly 10 pounds).
15. Yoke and wheel are easily removable for safekeeping, without tools.
16. Interchangeable - no need to buy two sets of wheels - just extra brackets for your other boat(s).
17. Are used on inflatable boats with wood transoms.
18. Long life expectancy (when used correctly).
19. Has simple instructions for easy installation.
20. Makes boat handling easier - especially for the young, old or physically challenged.
21. Saves wear and tear on your boat and your back.
22. No need to drag or carry your boat.
23. Launch your boat, motor and gear in one trip.
24. Great on boats used for duck hunting.
25. Low Maintenance. Keep pins greased and flush assembly and shaft alley with freshwater before stowing.
"I am a proud owner of your Easy Launch system mounted on my 10' boat. The system works even better than anticipated."
John in Kent, WA.
"Upon inspection of the wheels... they are indeed well made and well thought out in their design. I'm sure I'll get years of service from them. Thanks for making a quality product."
Geoff in San Diego, CA.
"I recently learned about your 'Easy Launch' system from a neighbor. I had struggled for months to launch my 15 foot aluminum boat. It always took two or three muscle-men to lift the boat in and out of the water, especially during low tide. I installed your 'Easy Launch' wheels last week and was furious... that I hadn't discovered them sooner!"
Richard in Kirkland, WA.
"We took the boat out last night, just the two of us, all by ourselves. I was able to winch it up while Harvey guided it over the logs. We didn't grunt or groan once! Such a pleasure. We hope you know how much we appreciate your efforts."
Kay in Coupeville, WA.
"I'm going to have my boat back in action much, much sooner than I anticipated. You provide a great product and great service."
Terry in Lynnwood, WA.
"The wheel arrived yesterday and I installed it this morning with little difficulty. From a very well satisfied "Easy Launch" customer, thanks."
Forrest in La Mesa, CA.
"There is up to a 10 foot tide variation on Puget Island, so your wheels are great for our sloped sandy beach. They have been a life-saver for us."
John in Beaverton, OR.
"The front wheel works great!"
Phil in Kaneohe, HI
"I recently visited a relative... who owns a small aluminum boat, and on the rear of the boat he has mounted two wheels -- in order to ease his transport over the rocky tidal beach and into the water. I was quite excited about the product, so I wrote down the name of the manufacturer. Please send me further information."
Nils in Denmark
"I've had several people ask for your address after seeing your wheels on my boat. Hope that turns into sales for you."
Ben in Cambria, CA.
"Thanks so much for sending the transom wheels. We are thrilled."
Bob in Rancho Cordova, CA.
"I simply wanted to tell you what a neat contraption that Easy Launch is. I have used it on my little 10 'footer', and 'by George' it has been a joy, even from shifting the boat around in the garage."
Bill in Seattle, WA
"I'm happy to say I was able to put Easy Launch to the test, and with most gratifying results. I've had trouble with my legs and hips and have not been able to go fishing for the last four years. Yesterday, thanks to 'Easy Launch', I was able to go and enjoyed a wonderful day."
Nes in Edmonds, WA.
"I recently learned about your 'Easy Launch' system from a neighbor. I had struggled for months to launch my 15 foot aluminum boat. It always took two or three muscle-men to lift the boat in and out of the water, especially during low tide. I installed your 'Easy Launch' wheels last week and was furious... that I hadn't discovered them sooner!"
Richard in Kirkland, WA .
1. Designed and manufactured with unsurpassed quality (two-year warranty).
2. Has solid cast aluminum construction. No welds or bolts.
3. Anodized for salt water use (highly corrosive resistant).
4. Has stainless steel locking pins and mounting hardware (will not rust).
5. Locking pins are connected by a stainless steel lanyard to help prevent loss.
6. The wheels are designed for strength, durability and performance.
7. Airtight polyethylene wheels are 6" wide and 12" high x 1/4" thick.
8. Wheels roll smoothly on hard surfaces with patented tread design.
9. The 'posi-roll tread' wheels roll over sand and mud, always climbing over the terrain rather than plowing or skidding.
10. The wheels can be used as a troll brake.
11. Wheels do not interfere with motor or fishing.
12. The boat, with wheels secured in standby position, can be rolled and/or stored upside down, clear of the ground.
13. The wheels can assist in loading the boat, for car top transportation.
14. Lightweight and strong (rear set 14 pounds; bow assembly 10 pounds).
15. Yoke and wheel are easily removable for safekeeping, without tools.
16. Interchangeable - no need to buy two sets of wheels - just extra brackets for your other boat(s).
17. Are used on inflatable boats with wood transoms.
18. Long life expectancy (when used correctly).
19. Has simple instructions for easy installation.
20. Makes boat handling easier - especially for the young, old or physically challenged.
21. Saves wear and tear on your boat and your back.
22. No need to drag or carry your boat.
23. Launch your boat, motor and gear in one trip.
24. Great on boats used for duck hunting.
25. Low Maintenance. Keep pins greased and flush assembly and shaft alley with freshwater before stowing.
Three wheels
on 12' "V" hull aluminum boat on beach in Puget Sound.
Three wheels mounted on boat
with wheels in boating standby position and boat inverted to keep boat interior clean & dry.
"Twin Hull"
Bow Wheel mounted on fiberglass boat
"V" Bow Wheel
Mounted on aluminum boat.
Dropped overboard...
Wheel and yoke. Look, it floats!!
Three wheels on "Twin Hull"
fiberglass boat, showing ease with which boat can be moved.
Three wheels
Mounted on "Twin Hull" fiberglass boat.
Three wheels on an aluminum boat
showing ease of moving the boat on a solid surface.
Inflatable Boat Bow Dolly
Attached to an inflatable boat with Transom Wheels mounted on the rear
Easy Launch Transom Wheels
Mounted on an inflatable boat on a beach in Indonesia.
"V" Bow Wheel close-up
Transom Wheels showing molded ribs and tread.
Transom Wheels
Mounted on "Twin Hull" fiberglass boat.
Transom Wheels
Mounted on a large inflatable boat.
Another close-up of Transom Wheels
Mounted on a large inflatable boat.
Transom Wheel
On inflatable boat in Indonesia (side-view).
Easy Launch wheel
Complete "Twin Hull" Bow Wheel assembly.
Boat also has an All Purpose Handle mounted on top of bow.
Transom Wheel Set
Mounted on fiberglass boat.